SPECIAL.LINE Every compass of the SPECIAL.LINE you will not find in every desk,
because they are very special: beam compasses, telescopic compasses, dividers proportional dividers.
From an order quantity over 500 pieces and an additional charge you can get these instruments with you
individual imprint.
|
 |
417T
Dividers with fixed needle points
A length of 145 mm allows using for a radius up to 175 mm. |
|
 |
617T
Dividers with replaceable needle points
A length of 140 mm allows using for a radius up to 175 mm. |
|
 |
618T
Dividers with fixed needle points
A length of 145 mm allows using for a radius up to 180 mm. |
|
 |
717T
Dividers with replaceable needle points
A length of 155 mm allows using for a radius up to 200 mm. |
|

|
301
One Hand Divider made of brass with a chrome finish.
|
|

|
302
Straight Pattern Divider made of brass with a chrome finish. |
|

|
311
Straight Pattern Divider made of brass with a matt finish. |
|

|
312
Straight Pattern Divider made of brass with a matt finish. |
|
 |
801
Proportional Divider (200 mm) with rack movement
and a special scale on the vernier. This propotional divider is made of brass
with a chrome finish.
|
|
 |
802
Proportional Divider (200 mm) with rack movement.
This propotional divider is made of nickel silver.
|
|
 |
805
Proportional Divider (200 mm) made of brass with a nickel finish.
|
|
 |
806
Proportional Divider (184 mm) made of brass with a nickel finish.
|
|
 |
810
Proportional Divider (200 mm) made of aluminium.
|
|
 |
602
Telescopic Compasses
One leg has a knee-joint and an interchangeable lead insert
(pivot: Ø 3.5 mm). The other leg has a swiveling needle. The telescope
lengthening bar in the left leg allows drawing circles up to 480 mm in diameter. |
|
 |
7002
Telescopic Compasses
Both legs have a knee-joint and one has an interchangeable lead insert
(pivot: Ø 3.5 mm). The telescope lengthening bar in the left leg allows
drawing circles up to 500 mm in diameter. |
|
 |
836
Drop Bow Compasses
|
|
 |
901
Swivel Bow Compasses
|
|

|
913F
Beam Compasses Set
with two aluminium bars (each with a length of 330 mm), two sliders
(for a diameter of the pivot of 3.5 mm) and a coupling for combining the two bars.
Further the set contains a needle insert, a lead insert, a pen part, an adaptor for
technical pens for the use in the sliders, as well as fine line lead insert (0.5 mm)
for the use in the adaptor. |
|

|
913F/E
Beam Compasses like number 913F but with a scale
(”cm” and ”inches”) on both aluminium bars.
|